Gdo gdo roll 55 remote control half hood premium colours aluminium roller garage doors

This simple, but very modern, high quality electric aluminium roller garage door is designed for all single width size garages up to 3000mm wide, including the guide width either side of 60mm.
This compact roller shutter door was developed by GDO to offer a fully compliant, remote control operated roller garage door, complete with 2 remote handsets and a bottom edge safety detection system incoprated into the rubber bottom seal to stop the door if it meets any obstruction during operation.
An internal wall mounted control box also gives you door operation control internally without the remote handsets and you can also have an optional external keyswitch for operating the door from outside if required (hard wired) without the remote handsets.

Made to measure sizes up to a maximum ordering width of 3000mm - including the guides either side.
Maximum height for this door is 2225mm plus the height of the roll and endplates, which is 205mm x 205mm at all sizes

The roller door curtain is offered in 15 superb high quality finished colours and 3 of those colours are at no charge with 12 other colours with a small surcharge.
The guides, endplates and full hood are also finished in the same colour as you choose for the curtain when ordering, again with 3 standard colours at no charge and a small surcharge for the 12 premium colours. So many people think all roller shutter doors are the same but the curtain is a good example of where a lot of quality differences are, just in terms of their manufacturing process, quality and guage of aluminium and perhaos the most important thing, the final paint finishing. Poor paint finishing will result in fast degradation of the external surface of the door. 

The door also has an internal manual emergency override winding handle system to operate in the event of a power failure. This facility is incorporated into the motor drive so is always positioned on the the same side as the motor side chosen. There is an options for an external low level manual override system if you have no ther access to your garage. This device takes the winding system down the wall to waist height to then present outside for access externally in the event of power failure.

This is the Half Hood cover version for this roller door, whish offers a folded 90 degree aluminium profile to provide a front fascia and better weather protection. The half hood cover is fitted to lugs fitted to the endplates on either side of the roller barrel which the curtain rolls around.

We would always recommend you have the full hood cover version for any roller type door because it does protect and provide better overall results.

Domestic electric roller garage door for domestic use.

Remote control electric operation with 2 handsets as standard. Simple locking strap for holding curtain closed.

The GDO ROLL 55 is constructed from high quality 55mm deep double skinned aluminium slats with a foam filled core. It is a made to measure, 240V, tube motor operated, electric roller garage door, manufactured to the exact millimetre in width and height.

The door is remote control electrically operated as standard and incorporates an internal emergency manual release in case of a power failure. This is a winding process using a winding handle provided attaching via a hook to the eye of the motor drive. This can be specified as either on the left or right as viewed from inside the garage (same side as motor).
2 handsets are provided as standard using a radio remote signal and a pulse control logic. One button push to open, one push to stop the door if required during the opening or closing cycle and then one push to close the door once opened fully. The door has a bottom edge safety detection system to detect any obstacles during operation. The door will stop as soon as it hits any obstacle. The detection systsem is built into the bottom rubber edge seal.
The Genesis internal wall mounted control system dimensions are 140mm h x 120mm w x 50mm d.

The curtain of this door rolls around a steel barrel which is supported either side by steel endplates which have a dimension of 205mm x 205mm, which is the headroom required if you wish to hide the roll. Always allow for a maximum 50mm of curtain ‘hang down’ when the door is opened if the opening height is critical to you. This is the same on all roller garage doors.
The guide height as used for ordering does not included the endplate size above it and the loss of drive through height with the bottom slat hang down when open

Door guides either side are 60mm wide and 34mm deep and the door is ordered using the ‘OVERGUIDE’ width from the curtain and guides combined.

The door can be fitted BEHIND or INBETWEEN the structural opening as required but always check you have order the correct dimensions to take into account the guides and endplates (full hood cover if ordered is the same dimensions) if you require an exnternally face fitted electric roller shutter door please email or contact us by phone for a more in depth discussion as to the best solution.

Internal emergency override	Lined guide	ZF Lock	Barrel	safety brake

 Please note: upon delivery, the accessory box will include a QR code to direct you to the most up-to-date installation instructions.

Warranty Terms & Conditions

Ordering sizes are the Over Guide Width (OGW) x Guide Height (GH). No tolerances are ever incorporated and all manufacturing is to the exact millimetre.

All ROLL 55 Doors have 60mm wide aluminium guides

Clear opening height = guide height - 50mm (to allow for the bottom slat hand-down into the guide). The 205mm endplates incorporating the motor and barrel are to be added onto the guide height to give your total height required (Overall Height)