- Description
- Application
- Specification
- Installation
- Warranty
- Measure
This high quality, remote control, electric operated, insulated, aluminium double skinned roller garage door keeps things simple. it is made to measure as standard for a perfect fit to your garage, optimising the drive through width when fitted behind the opening. The door can be fitted internally as a face fit or inbetween your opening if required, or a bit of both even. Always remember to include the guides and the endplates which hold the roller curtain barrel.
2 hand held remote control units are supplied as standard for controlling the door up and down, but also to stop wherever you want. being remote control the door has safety detection built in with a bottom edge rubber seal with sensor to detect an obstruction and stop the door immediately.
You also have an internal wall mounted control panel which also has a button operation on it for simple internal control without the handsets.
Made to measure doors sizes up to a maximum width of 5200mm, including the guides either side.
Maximum height is 2900mm, plus the height of the roll and endplates which is 300mm regardless of whether you have a hood cover or not
The aluminium side channel guides are either 70mm or 90mm, depending on the door width ordered.
Doors over 3000mm wide will always have 90mm guides as standard so the clear opening width will be 180mm less than the ordering width.
The roller curtain is offered here in 3 very popular and striking colours - with white, black or anthracite guides when ordered.
Emergency Override
Every electric roller door has an internal emergency manual override system in the form of a winding handle operation on the same side as the motor drive. Simply hook the windig handle up and rasie or lower your door if there is a power cut. if you do not have a pedestrian door entrance into your garage then order the low level external manual release to provide access to the emergency system from the outside.
This no hood cover model is perfect if your roller door is fitting totally behind the structural opening and is higher than 2.1m.
Domestic single and double width garage door. Light commercial use with less than 10 operations per day.
The GDO ROLL 77 is constructed from high quality 77mm deep double skinned aluminium slats with a foam filled core. It is a made to measure, electric operated roller garage door as standard, made to the exact millimetre in width and height.
The door is electrically remote operated as standard and incorporates an internal emergency manual release in case of a power failure. This is a winding process using a winding handle provided attaching via a hook to the eye of the motor drive. This can be specified as either on the left or right as viewed from inside the garage.
The door is supplied with 2 remote handsets and an internal wall mounted control panel with inbuilt receiver for the remote controls.
The bottom slat is extruded and supplied fitted with a rubber seal system incorporating an infra red beam internally. Any obstacle is detected when the door is operating and the door will instantly stop to prevent damage or injury.
The curtain of this door rolls around a steel barrel which is supported either side by steel endplates which have a dimension of 300mm x 300mm, which is the headroom required if you wish to hide the roll. Always allow for a maximum 50mm of curtain ‘hang down’ when the door is opened if the opening height is critical to you. This is the same on all roller garage doors.
 |
 |
 |
 |
 |
| Emergency internal override | Lined guides and bottom seal | ZF Lock | Barrel | safety brake |
The door can be fitted BEHIND or INBETWEEN the structural opening as required, but always check you have ordered the correct dimensions to take into account the guides and endplates (full hood cover if ordered is the same dimensions)
Ordering size is the Over Guide Width (OGW) x Guide Height (GH).
Doors up to 3000mm wide will have 70mm wide guides either side
Clear opening width = Ordering width less 140mm
Clear opening height = Guide height (Ordering size) less 50mm
Doors over 3000mm wide will have 90mm wide guides either side
Clear opening width = Ordering size less 180mm
Clear opening height = Guide height (Ordering size) less 50mm
(to allow for the bottom slat hang-down into the guide when door is open)
Maximum Width including guides is 5200mm
Maximum Height for guides is 2900mm (Total of 3200mm with the endplates and hood) with a maximum width of 4600mm
Standard Colours:
White (RAL 9016)
Anthracite Grey (RAL 7016)
Black (RAL 9005)
Please note: upon delivery, the accessory box will include a QR code to direct you to the most up-to-date installation instructions.
Warranty Terms & Conditions
Ordering size is the Over Guide Width (OGW) x Guide Height (GH).
Doors up to 3000mm wide have 70mm wide guides
Clear opening width = Ordering size - 140mm*
Doors over 3000mm wide have 90mm wide guides
Clear opening width = Odering size - 180mm*
* These measurements are correct for behind fit installations, please contact us for guidance inbetween fit installations.
Clear opening height = guide height - 50mm (to allow for the bottom slat hand-down into the guide).
Overall Height is the guide height plus the endplate size at 300mm
