Gdo gdo roll 77 electric button control no hood 3x standard colours aluminium roller garage doors

Close Menu
GDO Roll 77 Electric Button Control with No Hood - up to 5200mm Wide
Roller Garage Doors
3 Standard Colours
Material: Aluminium 
Enquiry Form
Call Us
Email Us
Web Price: £597.00
(Excluding VAT and £716.40 Inc. VAT)
1
Ordering
Width
Height
Web Price: £597.00
(Excluding VAT and £716.40 Inc. VAT)
Secure Payment
NEED HELP? Call us on 01933 448 850
or click here to connect via our Live Chat
  • Description
  • Application
  • Specification
  • Installation
  • Warranty
  • Measure
Description

This high quality, electric operated, insulated, aluminium double skinned roller garage door keeps everything simple and makes perfect sense if you don’t come in and out your garage with a vehicle but always enter and exit on foot every day, whether that is from the inside as an integral garage or from outside as a detached garage. If you have an integral garage right next to your home and don't put your car in it, then this is a door for you.

A simple, neat, wall mounted rocker switch gives you buttons to raise and lower the door without the need for electronic safety detection systems, such as infra red beams or bottom edge sensors. You control the door as a 'hold to run' logic and as long as you have full sight of the door during operation you have a fully compliant electric door.

This roller door was developed by GDO to offer a compact roller garage door with a very simple, wall mounted push button operation, for everyone who uses their garage for any purpose where you walk to the garage, either from outside or inside, but always as a pedestrian and therefore why would you need a remote control system? It is perfect for integral garages, but also for any detached garage where you always walk to the garage anyway. In fact this door is perfect for anyone who simply doesn't use their garage for vehicle storage.
If you are regularly entering and exiting your garage with your vehice, then we do suggest remote control operation.

A hold to run wall mounted control box gives you door operation control internally and you can also have an optional external keyswitch for operating the door from outside if required (hard wired). This hold to run control for the door means there is no necessity for any infra red beams or a bottom edge safety sensor as the door operator has full control of the door during operation and can stop at any point during operation it is essential the operator is in full view of the door for this type of hold to run control.

Made to measure doors sizes up to a maximum width of 5200mm including the guides either side.
Maximum height is 2900mm plus the height of the roll and endplates which is 300mm
The aluminium side channel guides are either 70mm or 90mm, depending on the door width ordered.
Doors over 3000mm wide will always have 90mm guides as standard so the clear opening width will be 180mm less than the ordering width.

The roller curtain is offered here in 3 very popular and striking colours - with white, black or anthracite guides when ordered.

Every electric roller door has an internal eemergency manual override system in the form of a winding handle operation on the same side as the motor drive. Simply hook the windig handle up and rasie or lower your door if there is a power cut. if you do not have a pedestrian door entrance into your garage then order the low level external manual release to provide access to the emergency system from the outside.

This no hood cover model is perfect if your roller door is fitting totally behind the structural opening and is higher than 2.1m.

Application

Domestic or light commercial push button operated electric roller door with 240V tube motor

Specification

Roll77 slat profile

The GDO ROLL 77 is constructed from high quality 77mm deep double skinned aluminium slats with a foam filled core. It is a made to measure, electric operated roller garage door as standard, made to the exact millimetre in width and height.

The door is electrically operated as standard and incorporates an internal emergency manual release in case of a power failure. This is a winding process using a winding handle provided attaching via a hook to the eye of the motor drive. This can be specified as either on the left or right as viewed from inside the garage.

The curtain of this door rolls around a steel barrel which is supported either side by steel endplates which have a dimension of 300mm x 300mm, which is the headroom required if you wish to hide the roll. Always allow for a maximum 50mm of curtain ‘hang down’ when the door is opened if the opening height is critical to you. This is the same on all roller garage doors.

 
Internal manual override fro emergencies
Emergency internal override Lined guides ZF Locking Barrel safety brake
 
Door guides either side are either 70mm or 90mm wide and 34mm deep and the door is ordered using the ‘OVERGUIDE’ width from the total width of the curtain and guides combined.

The door can be fitted BEHIND or INBETWEEN the structural opening as required, but always check you have ordered the correct dimensions to take into account the guides and endplates (full hood cover if ordered is the same dimensions)

Ordering size is the Over Guide Width (OGW) x Guide Height (GH).

Doors up to 3000mm wide will have 70mm wide guides either side
Clear opening width = Ordering size less 140mm
Clear opening height = Guide height (Ordering size) less 50mm

Doors over 3000mm wide will have 90mm wide guides either side
Clear opening width = Ordering size less 180mm
Clear opening height = Guide height (Ordering size) less 50mm
(to allow for the bottom slat hang-down into the guide when door is open)

Maximum Width including guides is 5200mm
Maximum Height for guides is 2900mm (Total of 3200mm with the endplates and hood) with a maximum width of 4600mm

Standard Colours:  

White (RAL 9016)
Anthracite Grey (RAL 7016)
Black (RAL 9005)

 

 

Installation

 Please note: upon delivery, the accessory box will include a QR code to direct you to the most up-to-date installation instructions.

Warranty

Warranty Terms & Conditions  

Certificate of Guarantee
1.1. The following guarantees apply to GDO Roll 55 and Roll 77 Electric Button Control roller garage doors, subject to correct installation, maintenance and operation:
1.1.1. GDO Roll 55 and Roll 77 Electric Button Control roller garage doors are guaranteed against defect of material or workmanship by the manufacturer with a parts only warranty for a period of 2 years from the date of original purchase.
1.1.2. GDO Roll 55 and Roll 77 Electric Button Control roller garage doors’ exterior finish is guaranteed to provide an effective weatherproof membrane that will resist perforation of the substrate from the weather side due to corrosion for a period of 2 years from the date of purchase.
1.1.3. Externally fitted reverse roll GDO Roll 55 and Roll 77 Electric Button Control roller garage doors will resist perforation of the substrate from the weather side due to corrosion for a period of 2 years from the date of purchase. Colour change or fade to the exterior surface will be limited and uniform during the guarantee.
1.1.4. GDO Roll 55 and Roll 77 Electric Button Control motors and the Genesis, Teleco Simple and C10 control units are guaranteed for a period of 2 years from the date of purchase. 
1.1.5. Somfy motors and the Rollixo control unit are guaranteed for a period of 5 years from the date of purchase.
1.2. This guarantee is in addition to your legal rights in addition to the manufacturers products that may be faulty or not as described. Advice about your legal rights is available from your local Citizens’ Advice Bureau or Trading Standards Office.
1.3. The following terms apply to all GDO Roll 55 and Roll 77 Electric Button Control roller garage doors purchased for installation in the UK. The terms shall prevail or be in addition to any agreement between you, the customer, the installer and/or the manufacturer.
1.4. The manufacturer will replace any components of our products sold as GDO Roll 55 and Roll 77 Electric Button Control roller garage doors (‘the Product’) where the manufacturing process has resulted in a defect occurring during the relevant period specified in the Conditions of Guarantee.
 
Measure

Ordering size is the Over Guide Width (OGW) x Guide Height (GH).

ALL GDO ROLL 77 Doors up to 3000mm wide have 70mm wide aluminium guides
Clear opening width = Ordering size - 140mm*

ALL GDO ROLL 77 Doors over 3000mm wide have 90mm wide aluminium guides
Clear opening width = Ordering size - 180mm*

* These measurements are correct for behind fit installations, please contact us for guidance inbetween fit installations.

Clear opening height = guide height - 50mm (to allow for the bottom slat hand-down into the guide). 
Overall Height is the guide height plus the endplate size at 300mm regardless of whether it has a full hood or no hood cover.

 

GDO Roll77 Measuring Diagram