SpecificationSLX 40 'High Vision' sectional door – uninterrupted vision
The SLX 40 utilises full width uninterrupted glazed sections for a panoramic effect. A centre mullion is required on doors over 3000mm wide.
Aluminium frame construction made from aluminium tubular profiles, E6 / EV1
Available without centre mullions up to door widths of 3000 mm
Elegant and sleek design with maximum panel section height of 750mm. Standard windows are double glazed synthetic 20mm, scratch resistant.
Colours available:
Traffic White - RAL9016
Grey Aluminium - RAL9007
White Aluminium - RAL9006
Grey White - RAL9002
Sepia Brown - RAL8014
Anthracite Grey - RAL7016
Fir Green - RAL6009
Flame Red - RAL3000
Size:
Width, maximum 4000mm
Height, maximum 6000mm
Door leaf weight approx. 12 kg/m2
Performance:
Thermal insulation Ud W/m2K 3.5
High-quality glazed panels, 40 mm thick.
Resistance against wind loads class 2
Air permeability class 3.
Water penetration resistance class 2/3.
Fire performance per EN 4102, door leaf element building material class B2.
Vision options:
Clear
Satin
Crystal structure
Clear tinted brown; light transmission of approx. 50 %
Clear tinted green; light transmission of approx. 70 %
Clear tinted grey; light transmission of approx. 43 %
Operation:
Direct-mount drive with emergency manual chain.
Chain drive.
Direct-mount drive with emergency manual crank.
Manual chain hoist.
Safety:
Light beam non-contact protection option.
Safety edge option.
Anti-pinch panels.
side hand guard.
Anti-drop spring failure protection.
Space requirement:
Manual operation on both sides min. 110 mm.
Manual operation (NSH/NSD) min. 120 mm.
Geared chain min. 185 mm.
Shaft drive min. 210 mm.
Chain drive min. 150 mm.
Configuration:
Normal fitting.
ND: Normal fitting following roof line (max. 30°).
HLU: High lift guide rail fitting with underlying torsion spring shaft.
NSH: Low-headroom fitting with rear-mounted spring shaft.
HLD: High lift guide rail fitting following roof line (max. 30°.)
NSD: Low headroom fitting following roof line (max. 20°).
HLDU: High lift guide rail fitting following roof line and underlying torsion spring shaft.
HL: High-lift guide rail fitting.
VLU: Vertical lift fitting with underlying torsion spring shaft.
VL: Vertical lift fitting.
Fittings with 2x45° deflection: Ideal for avoiding obstacles in the lintel area.