DescriptionThe Seceurodoor 77c roller shutter door offers insulation from a tried and tested steel insulated double skinned slat with a central foam core.
This manual operated steel roller shutter is becoming a far more popular type of roller shutter for sizes up to 5m wide and 4m high, covering a lot of aperture sizes on many buildings in the UK. It offers one of the lowest price methods to close off any aperture whilst also offering insulation too. The door is a fully compliant ‘door’ in use for a commercial or industrial application.
The Seceurodoor 77C is made to measure as standard for the perfect fit and being a Traditional build this is generally for an internal face fit, which is the majority of industrial roller doors on any steel fabricated building but also for other structures too, timber or brick built.
The Traditional build and simple manual chain operation with gearing offers a door perfect for low use applications where infrequent access is required or there is simply no power available.
Thermal and Acoustic Insulation
Minimal thermal bridges and the use of fine-pored PU rigid foam infill ensure good thermal insulation whilst curtain and sealing technology used around the entire shutter reduce noise from both inside and outside.
Heat transmission performance for an operational door unit 4.01 W/(m2 K)
Max width 5000 mm
Max height 4000 mm
Max area 20 m2
Can be powder coated any colour
Choice of 4 guide arrangement options
Standard guide angle is 75 mm x 50 mm
Other sizes are available on request
Application Typical use would be on any standard size UK farm building, workshop or factory warehouse which isn’t accessed very often and would benefit from the insulated door. You do require another method of entry to enable access to the internal chain, locking and hoisting mechanism.
In our ordering process you can choose the guide and operation side to suit your needs and structural opening layout.
SpecificationThe standard build uses a 77mm deep galvanised steel double skin, insulated slat curtain, available in various colour finish options. We do offer other manual insulated roller shutter doors with a spring and lock mechanism if headroom is limited or you require smaller guides, etc.
Colours
This roller door is available with the curtain prefinished in a choice of powdercoat finishes which would be the same colour each side of the slat.
As totally standard and used by many people, depending on the roller door location, you can have the steel curtain in its natural galvanised steel finish.
We can offer the door in special colours other than the ones showing in our online shop options and of course you can mix and match the guides, hood cover and curtain if required, please email or call for details and prices.
ALL SeceuroDoor products are:
- CE or UKCA marked. Purchasing any product for commercial use requires full compliance with UK regulations. Approved LPCB products also available.
- Manufactured within an ISO9001 and ISO14001 certified UK company
- Made to measure as standard for a perfect fit
- Using the highest quality components
MeasureOrdering Sizes for any of our ‘Traditional’ build roller shutter doors are the actual daylight opening sizes In-Between the side guides and Underneath the endplates. Make sure you always understand the guide and angle widths either side of the door curtain and the endplate/hood cover size in relation to the door size ordered.
For the perfect internal face fitting situation behind an opening these ordering sizes are effectively the aperture size, but there is always a small hang down on the bottom slat when fully open, which affects the final drive through height. If you need to maximise your height then the hangdown needs to be accounted for and the door ordered higher.
Samson Doors will always provide a final detailed door drawing for you to check and sign off with us before any manufacturing commences.
The Traditional build on this roller shutter door incorporates steel guides and track angles with optional arrangements to suit the fixing points on site. A ‘Traditional’ build roller shutter will use steel guides, channels, endplates and optional hood cover. Using steel components means the door can be larger than the Continental style roller shutters. Click
here for further information.
The endplates and hood cover size will vary depending on the height of the door so please be aware to check the drive through height and endplate size.
.jpg)
