SeceuroDoor 7502 - SR2 Rated - 3 Phase 415v Chain Drive Motor
Security Rated Roller Doors
Max width 6.2m Max Height 4.4m
Material: Steel
Enquiry Form
Call Us
Email Us
Web Price: £3,740.00
(Excluding VAT and £4,488.00 Inc. VAT)
1
Ordering
Web Price:
£3,740.00
(Excluding VAT and
£4,488.00
Inc. VAT)
NEED HELP? Call us on 01933 448 850
or click here to connect via our Live Chat
- Description
- Application
- Specification
- Installation
- Warranty
- Measure
Description
Seceurodoor roller shutter doors represent the very best in quality and performance.
This particular 7502 model is a higher security rated version of the single skin steel door, with a level 2 certification - LPS1175 standard.
The Traditional build door and use of a GfA 415V industrial electric motor give a door package which will cover most applications in the UK where high speed or insulation is not required, but security is most important.
The thickest guage 18swg curtain offers an even stronger door curtain over the 20 and 22 guage models. If you want a quieter roller door, maybe because of exposure to higher winds or proximity to a dwelling, but also good security then look at our SeceuroDoor 9501 double skinned shutter curtain models
PLEASE NOTE: THIS DOOR OR SHUTTER MUST TO BE FACE FITTED INTERNALLY TO COMPLY AND ACHIEVE THE CERTIFICATION FOR THE LEVEL 1 RATING. The guides and complete roll of the curtain must be completely behind the structural opening and not visible from outside. If you choose to fit inbetween of externally then the certfication compliance is not possible
Insurance approved security shutter tested to Loss Prevention Standard LPS1175 (LPS1175)
This is a low to medium use, high quality, industrial ‘Traditional’ build roller shutter door, using a three phase, 415V, external mounted chain drive industrial GfA motor for electric operation. Built and tested for internal face fitting in the traditional build set up, this door will cover so many applications and provide excellent and reliable daily operation.
GfA manufacture the very best industrial door motors, with leading edge technology and excellent and reliable access control options. Electric drive 415V motor roller doors are usually for medium to higher usage openings, with higher than average daily use. Various control options are available and we offer the 3 most popular only in our online shop. If you require specialist access controls then please email or call us directly.
The rigorous LPS 1175 burglary resistance standard is operated by the Loss Prevention Certification Board (LPCB). LPCB are the UK’s leading independent certification body and the LPS 1175 standard is recognised and endorsed by 16 organisations including the Association of British Insurers and the Association of Police Officers.
Security level 2
Galvanised steel curtain and guides as standard
Strong single skin galvanised steel profile
High security industrial applications
Spans widths up to 6000 mm
Can be powder coated any RAL / BS colour with multiple standard colour options as standard
18g steel slat
Internal face fit only for certification compliance
Bullet locks fitted to the internal side as standard (accessed from the inside of the building only)
Application
Typical use would be on any building, workshop or factory warehouse requiring higher levels of security and peace of mind. Standard motor and specification is rated to offer around 30 - 60 operations per day, or less. High performance motors can be specified when using three phase drive for higher usage.
This roller shutter includes an internal mounted emergency manual override facility as standard, with a chain pulley override integrated with the motor on the same side as chosen.
In our ordering process you can choose the guide and motor arrangement to suit your needs and structural opening layout.
Specification
PLEASE NOTE: THIS ROLLER SHUTTER DOOR MUST TO BE FACE FITTED INTERNALLY TO COMPLY AND ACHIEVE THE CERTIFICATION FOR THE LEVEL 1 RATING. The guides and complete roll of the curtain must be completely behind the structural opening and not visible from outside. If you choose to fit inbetween of externally then the certfication compliance is not possible
The standard build of this door uses the thickest 18 guage (1.2mm) galvanised steel single skin curtain available in various standard colour finish options.
Colours
This roller door is available with the curtain prefinished in a powdercoat finish which would be the same colour on each side of the slat.
The standard powdercoat colours are a satin finish but gloss or matt finishes are available, please call or email for up to date details.
As totally standard and used by many people, depending on the roller door location, you can have the steel curtain in its natural galvanised steel finish.
We can offer the door in special colours other than the ones showing in our online shop options and of course you can mix and match the guides, hood cover and curtain if required, please email or call for details and prices.
PLEASE NOTE: THIS ROLLER SHUTTER DOOR MUST TO BE FACE FITTED INTERNALLY TO COMPLY AND ACHIEVE THE CERTIFICATION FOR THE LEVEL 1 RATING. The guides and complete roll of the curtain must be completely behind the structural opening and not visible from outside. If you choose to fit inbetween of externally then the certfication compliance is not possible
Control Options
The electric chain drive 415V motor can be controlled by 2 standard methods:
The most basic method is an internal wall mounted push button station with a hold to run logic. You stand and hold the button firm for the duration of the opening or closing cycle and this way no safety edge or beam systems are legally required keeping the costs to a minimum. Of course you must be able to enter the building via another door for this method.
The second option is a wall mounted control panel which can be programmed to have an impulse operation meaning you simply push the up or down button momentarily and the door will auto operate and has safety edge detection built in with the bottom T rail section to stop if an obstacle is met.
For LPS1175 level 2 compliance when the door is closed the bullet locks have to be inserted and secured in place.This would normally be carried out at the last operation of the day and part of the security protocol in place.
ALL SeceuroDoor products are:
- CE or UKCA marked. Purchasing any product for commercial use requires full compliance with UK regulations. Approved LPCB products also available.
- Manufactured within an ISO9001 and ISO14001 certified UK company
- Made to measure as standard for a perfect fit
- Using the highest quality components and electric motor drives
Installation
Installation details are provided with every door. You can dowmload a PDF brochure of the installation in our Downloads section or to the left here.
We also have a short video to show the process of installation..
Warranty
All Seceurodoor products, including the electric motors and controls are guaranteed against defects of material and workmanship by SWS (the manufacturer) and subject to correct installation, maintenance and operation, for a period of 1 year from the date of purchase (invoice date)
Measure
The measuring, pricing and ordering dimensions for any electric roller shutter door with an industrial electric motor drive is by the OPENING WIDTH and GUIDE HEIGHT excluding the guides for the width and endplates for the height. See measuring diagram below.
This is regardless of whether it is a single or three phase electric motor system.
OPENING WIDTH inbetween guides = Ordering Width
GUIDE HEIGHT with endplates excluded = Ordering Height
The overall width at high level where the endplates are fitted will be wider than the overall guide width and can be wider still, depending on the choice of inboard or outboard motor set up.
The electric motor side with an outboard motor required more side room than the non motor side at endplate level.
Chain drive or direct drive motor choice will vary the width required for the motor.
The emergency manual override included as standard is the same side as the motor internally and is accessed directly underneath the endplate. Other positions are available on request.
The endplate size will vary depending on the door model and height and therefore the size of the curtain roll when fully opened and rolled up.
The Traditional build roller shutter door uses steel guides and angle profiles for installation which can all be specified to suit different installation requirements.
Face Fit - Behind the Opening (recommended for Traditional build industrial doors)
Most industrial roller shutter doors are installed to the inside face of the aperture and in a perfect scenario your daylight opening dimensions are the inbetween guides and underneath end plate dimensions, bearing in mind ANY roller shutter will always have a ‘hangdown’ when opened fully making the final drive through slightly less than the height of the guides. This is normal and varies on different models depending on the curtain specification. If your opening drive through height is critical speak to us first to determining the best height to order.
Reveal Fit - Inbetween the Opening
Some roller shutter doors are installed inbetween the aperture and this is where the electric tube motor roller door arrangement is best used, as all components are inboard from the ordering dimensions. You can install ANY roller shutter door inbetween an opening, but industrial motor driven models require some additional steel work to make them fit inbetween properly.
Traditional Build Industrial Motor Driven Arrangement and Ordering Dimensions
(showing outboard direct drive motor arrangement)
Try some of our best sellers
