DescriptionKeep your premises and property safe with the Samson StoreGuard.
This range consists of three doors, each with different levels of security.
SR2 has been tested to LPS1175 SR2: Offers up to 3 minutes resisting an opporntunist burglar forcing entry of protected premises with various tools such as levers, drills and screwdrivers.
Ideal for domestic properties or commercial premises where a level of security is required.
SR3, tested to LPS1175 SR3: Offers up to 5 minutes of resistance during a determined break-in of protected premises using tools such as a crow bar, short axe and cordless tools.
The SR3 is ideal for commercial premises or buildings with a risk of burglary.
SR4, tested to LPS1175 SR4: Offers up to 10 minutes of resistance when undergoing a break-in by a more experienced burglar using tools such as a sledgehammer, power drill and high powered cordless tools.
With the greatest levels of resistance of the StoreGuard range, the SR4 is suitable for applications where there is a significant risk of attack.
SpecificationThe Samson StoreGuard doors are specially constructed to individual project requirements and each door has internal reinforcement designed to resist sustained attack from a wide range of tools.
All StoreGuard Doors are custom made.
All doors contain additional internal reinforcement in strategic locations to enhance attack resistance.
Door Leaf |
SR2 |
SR3 |
SR4 |
Single Doors Latched |
Max width: 1250mm
Max height: 2600mm |
Max width: 1300mm
Max height: 2500mm |
Max width: 1300mm
Max height: 2500mm |
Double Doors |
Max width: 2500mm
Max height: 2600mm |
Max width: 2500mm
Max height: 2500mm |
Max width: 2500mm
Max height: 2500mm |
Thickness |
46mm |
59mm |
61mm |
Material |
Aluzinc |
Aluzinc |
Aluzinc |
Infill |
Honeycomb/Mineral Wool |
Solid Timber |
Solid Timber |
Construction |
Welded |
Welded |
Welded |
Door Frame |
|
|
|
Frame Width |
102mm |
115mm |
115mm |
Material |
Aluzinc |
Aluzinc |
Aluzinc |
Construction |
Bolted |
Welded |
Welded |
Site Installation |
|
|
|
Strike |
4mm |
3mm |
3mm |
Hinge |
4mm |
13mm |
13mm |
Meeting Stile |
5mm |
5mm |
5mm |
Head |
3mm |
3mm |
3mm |
Floor |
7mm |
5mm |
5mm |
Note: For the doors to operate correctly is it imperative that the clearance at both the strike side on single doorsets and meeting stile on double doors is achieved and maintained as detailed in the table.
WarrantyAll Steel Doors manufactured using a base material of ‘Magnelis’ carry a 10 year anti-corrosion warranty in any locations classed as C1 – C3. Any locations classed as C4 or C5 would carry a 5 year and 3 year warranty respectively. Anti-corrosion warranty applies to the door leaf only unless we are informed prior to quotation and manufacturing and an additional protection is offered for components not available in magnelis such as the vision panels, louvre panels, etc… Any doors manufactured in Aluzinc carry a 24 month anti-corrosion warranty unless an enhanced PPC finish is requested and applied. All doorsets carry a 24 month warranty against manufacturing defects. All warranties are subject to site maintenance being carried out at regular intervals as outlined in the O&M manual.