DescriptionThe Samson SecurGuard Range of doors are designed to protect your property against intruders.
The range consists of three doors, each with different levels of security.
SR2 has been tested to LPS1175 SR2: Offers up to 3 minutes resisting an opporntunist burglar forcing entry of protected premises with various tools such as levers, drills and screwdrivers.
Ideal for domestic properties or commercial premises where a level of security is required.
SR3, tested to LPS1175 SR3: Offers up to 5 minutes of resistance during a determined break-in of protected premises using tools such as a crow bar, short axe and cordless tools.
The SR3 is ideal for commercial premises or buildings with a risk of burglary.
SR4, tested to LPS1175 SR4: Offers up to 10 minutes of resistance when undergoing a break-in by a more experienced burglar using tools such as a sledgehammer, power drill and high powered cordless tools.
With the greatest levels of resistance of the SecurGuard range, the SR4 is suitable for applications where there is a significant risk of attack.
SpecificationThe Samson SecurGuard doors are specially constructed to individual project requirements and each door has internal reinforcement designed to resist sustained attack from a wide range of tools.
All SecurGuard Doors are custom made.
All doors contain additional internal reinforcement in strategic locations to enhance attack resistance.
Door Leaf |
SR2 |
SR3 |
SR4 |
Single Doors Latched |
Max width: 1250mm
Max height: 2600mm |
Max width: 1300mm
Max height: 2500mm |
Max width: 1300mm
Max height: 2500mm |
Double Doors |
Max width: 2500mm
Max height: 2600mm |
Max width: 2500mm
Max height: 2500mm |
Max width: 2500mm
Max height: 2500mm |
Thickness |
46mm |
59mm |
61mm |
Material |
Aluzinc |
Aluzinc |
Aluzinc |
Infill |
Honeycomb/Mineral Wool |
Solid Timber |
Solid Timber |
Construction |
Welded |
Welded |
Welded |
Door Frame |
|
|
|
Frame Width |
102mm |
115mm |
115mm |
Material |
Aluzinc |
Aluzinc |
Aluzinc |
Construction |
Bolted |
Welded |
Welded |
Site Installation |
|
|
|
Strike |
4mm |
3mm |
3mm |
Hinge |
4mm |
13mm |
13mm |
Meeting Stile |
5mm |
5mm |
5mm |
Head |
3mm |
3mm |
3mm |
Floor |
7mm |
5mm |
5mm |
Note: For the doors to operate correctly is it imperative that the clearance at both the strike side on single doorsets and meeting stile on double doors is achieved and maintained as detailed in the table.