- Description
- Application
- Specification
- Installation
- Warranty
- Measure
- Videos
The cost-effective electric aluminium roller garage door with a space-saving tubular electric motor drive. All the benefits of any standard tube motor driven roller shutter door with the engineering quality expected from Hormann. This is a double skinned aluminium roller door using a smooth external face curtain profile.
16 standard beautiful finished colours are available to choose from and all the doors are purpose made as standard.
The door is remote control operated as standard, with 2 hand held transmitters included, and an internal control panel.
> particularly space-saving tubular operator with emergency manual gear
> compact door design with only 290 mm required headroom and only 75 mm sideroom (up to 3000mm wide)
> trouble-free to maintain curtain cover as standard
> Control with 2 control buttons in the hood cover and integrated radio receiver 868 MHz BiSecur
> safety acc. to DIN EN 13241-1 through closing edge safety device with optosensors
> standard emergency crank handle for opening the door in case of a power failure
> quiet door travel through track rollers
> handy belt system for the easy fitting of the curtain to the barrel
> motor position is on Left Hand Side when inside garage looking out.
Domestic roller garage door or light use commercial
Size range: Width (LB): 1200-5000mm, Height (LH): 1500-3100 mm
General
Roller garage door with tubular drive and emergency crank handle
for private use as an internal roller garage door. With integral catch safety device
and closing edge safety device as standard.
Frame
• Aluminium extrusion profile side guides with integrated strip brush profile and
• Doors up to 3000mm wide come with 75mm side guides and doors over 3000mm come with 105mm guides brush profile. Coating in door curtain colour.
• Lintel cladding made of sheet steel in door curtain colour.
• Barrel casing and side cladding made of sheet steel, coated in the curtain colour.
• Coating in the basic colour of the timber finish in Decopaint version.
Door curtain
Rolled aluminium profile foamed with polyurethane rigid foam with plastic runners,
77 mm section height with 2 ribs in the profile. Coloured versions with two-layer coil coating with a paint system based on a high-quality polyurethane coated with polyamide.
Surface coating
Interior and exterior of roller door curtain:
• Standard colours based on the RAL colour chart:
RAL 9016 Traffic white
RAL 1015 Light ivory
RAL 3003 Ruby red
RAL 3004 Purple red
RAL 5011 Steel blue
RAL 6005 Moss green
RAL 7015 Slate grey
RAL 7016 Anthracite grey
RAL 7035 Light grey
RAL 8028 Terra brown
RAL 9001 Cream
RAL 9005 Jet black
RAL 9006 White aluminium
RAL 9007 Grey aluminium
Chartwell Green
Noir 2100 Sable
Operator data
• Tubular drive with emergency hand chain drive, with mechanical travel limit and internal crank handle for operation during a power failure.
• Operation with 868MHZ radio receiver with 2x HSE 4 BS hand transmitters
• Electric Operator on left or right side
Control electronics
• Adjustable reversing procedure
• Adjustable pre-warning phase
• Connection of external illumination possible
• Adjustable automatic timer
• Connecting option for one-way photocell EL 31
Standard equipment
• Door including tubular drive, emergency hand chain drive and complete curtain cover as standard
• Control with 2 control buttons in the cover and integrated radio receiver 868 MHz rolling code
• 2 x Hörmann HSE2 hand transmitters
• Connection cable with plug
• Optical closing edge safety device with photocell in bottom profile
Important product information
Please note that the RollMatic TDL cannot be fitted to a garage without another means of access.
Full installation details provided with every door ordered.
In the unlikely event of a warranty claim becoming necessary, please contact the dealer or distributor who originally supplied your garage door. Your dealer should then supply details of the claim, together with a copy of the warranty card provided with the door and proof of purchase to the Product Services Department at Hörmann (UK) Ltd. To enable your claim under warranty to be processed as quickly as possible, you should provide the following details:
1 Your name, address and telephone number
2 Original invoice with date of purchase
3 Product description/door type and product number
4 Description of defect
An assessment of the claim will then be made. This may require Hörmann to inspect the product in-situ. In the event that there is no legitimate warranty claim under the terms specified herein, you may be liable for the costs of the inspection visit. We strongly recommend that you take note of the care and usage instructions displayed on the stickers on the back of your garage door, and on the page opposite, and that you follow these instructions throughout.
Hörmann (UK) Ltd Garage Door Warranty
Warranty Period The purchaser is granted a warranty covering the safe and reliable function of the Hörmann garage door for a period of 10 years from the date of purchase. A 5 year warranty applies to springs, wire cables, track rollers, hinges and guide rollers. The warranty period for replacement parts is 6 months or to the end of the current warranty period, whichever is longer. In the case of foilcoated timber-effect, a warranty of 5 years is granted, for timber and GRP doors a warranty of 2 years is granted on the door panels alone under the terms and conditions specified herein. The door mechanism and steel frame (if applicable) is covered by the 10 yearwarranty period.
Requirements
Warranty claims are only applicable in the country where the garage door was purchased. The product must have been purchased through our authorised distribution channels. The warranty only covers damage to the contract object. The fully completed warranty card together with the receipt of purchase correspondingly dated substantiates your right to claim under the warranty.
Performance
During the warranty period we undertake to rectify any and all defects to the Hörmann product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion either to exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage.
Replaced parts become our property.
The warranty does not cover damage caused through:
• normal wear and tear
• improper installation
• negligent care and maintenance
• improper initial and subsequent operation
• negligent or wanton destruction
• external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences
• mechanical damage through improper transport and fitting
• priming and other surface protection treatments
• incorrect or too late applied surface protection treatments
• repair by non-qualified persons
• using non-Hörmann parts without the approval of the manufacturer
• removal of the product number or making it unidentifiable
Electric Operator Warranty
A separate 5 year warranty is granted on our electric operators. This includes operator mechanics, motor and motor control systems. A 2 year warranty is granted on radio equipment, accessories and system controls. There is no warranty on consumables (e.g. fuses, batteries, bulbs etc.).
User Information/Care
Finish - Steel Doors
The coating process applied to the door and chassis is environmentally friendly. Minor scratches or marks are not covered under the conditions of our warranty and should be repaired immediately to prevent corrosion and deterioration of the panel. Corrosive substances such as acids, alkalines, and salts, etc. should be cleaned from the door immediately; failure to do so will result in deterioration of the finish, which will not be covered under our warranty. Should deterioration of the finish start to occur you will need to repaint your door immediately. Prepare the surface lightly with wet and dry. Then treat with solvent based 2 pack epoxy wash primer and a normal commercial paint (cellulose paint must not be used). Hörmann steel doors are a finished product. They do not require re-painting on site. They are however not immune to damage, which can occur at any stage of the handling of the product from factory to site.
Finish - Timber Doors
Timber panels are coated with a neutralising base-stain. Doors must be stored upright, under cover, with wrapping intact, until wrapping is removed. As soon as the door is unwrapped, one coat of a good quality basecoat primer must be applied to both sides of the door. Immediately after installation, your timber doors require a further two coats of a good quality exterior wood finish on both sides. Initial application and periodic treatment should be carried out strictly in accordance with the woodstain manufacturer's instructions. Failure to follow these instructions will result in early deterioration of the timber panel.
Finish - GRP Doors
GRP door panels should periodically washed down using water. This should be done more frequently if fitted near the sea. Bird droppings will bleach the finish on GRP. and should be removed using water as soon as possible. GRP doors should not be painted over.
