- Description
- Application
- Specification
- Installation
- Warranty
- Measure
- Videos
The New Decopaint finish insulated roller garage doors gives a 'wood look' but in a painted finish rather than foil coated like the Decograin doors.
The Rollmatic insulated aluminium roller garage door from Hormann is a revolution in roller garage doors as it operates very much in principal like a sectional garage door. The balance of the door curtain weight is achieved by a vertically mounted spring to one side with a motor driving the curtain barrel on the other. It is simple, safe and very smooth with the easiest of manual override systems for this type of roller shutter.
The Rollmatic is an aluminium roller shutter garage door constructed from the very highest quality double skinned aluminium foam filled slats to produce a very strong, smooth finish curtain that is always purpose made to suit the garage opening perfectly. It is remote control electric operated as standard with control of the door using any of the enormous range of current Hormann control accessories. Standard operation is with 2 remote control handsets and an internal pushbutton on the control panel with integrated light.
Standard specification includes:
> 2 hand held transmitters (1 HSM4 mini and 1 HSE 2 micro)
> Impulse remote control with integrated lighting in the control housing box.
> Automatic safety cut out with obstacle detection
> Soft start and soft stop operation.
> Emergency internal release in case of power failure
> Fully enclosed hood and fascia colour matched to the curtain colour.
> Colour matched guides for ALL doors including Decograin finishes.
> Mechanical security kit for prevention of vertical forced entry.
> Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
> Motor position is on Left Hand Side when inside garage looking out.
Optional Extras:
> Emergency exterior manual release if no other entrance is available
> Accoustic alarm if attempted forced entry occurs
> Emergency battery power supply for 5 cycles in 18 hour cycle. Recharging is permanent during normal operation
> Compensation Kit (fitted as standard) - to accommodate for unevenness on the building structure when fitting behind the opening.
All the Hormann control accessories for garage doors and gates can also be added if required to the Hormann Rollmatic giving total flexibility on how you specify and operate the door.
Domestic garages and low use commercial door openings.
Higher than standard wind ratings:
Up to 3500mm wide Class 5
Up to 4500mm wide Class 4
Up to 5000mm wide Class 3
Max width (opening width) 5000mm
Max height (opening height) 3000mm
Ordering sizes are different to most other roller doors as the sizes for ordering refer to the opening size (not the size including guides) on the width and height.
The guides are all 110mm wide each side whatever the size door and the headroom required for the roll and hood enclosure is 290mm up to 2300mm high and 335mm on doors from 2301mm high up to the maximum of 3000mm.
Example: Installing a Rollmatic to the inside face of a structural opening of 2280mm wide and 2150mm high (underneath lintel) you will have a door with an overguide width of 2480mm and a total height with the hood enclosure of 2440mm.
Decopaint finishes:
Golden Oak - medium brown, yellow and gold surface with vibrant oak character
Rosewood - reddish brown striped timber design
For further information on the Hormann Rollmatic Roller garage doors, click here >
Full installation details provided with every door
10 year guarantee
Please Note: From 30th November 2015, the guide size has changed from 100mm to 110mm.
