- Description
- Application
- Specification
- Installation
- Warranty
- Measure
The Gliderol Series B Light Industrial Roller Shutter is a simple, steel, single phase 240V electric operated roller shutter door and perfect for low usage applications and where security isn't a massive issue. The simple continuous steel, roll formed curtain is a lightweight curtain prefinished in several plastisol coated external finishes.
It is a very established, simple, but solid roller shutter door for so many applications where a basic roller door is all that is required. It is a single skin steel construction with a continuous curtain gliding in galvanised steel side channels designed to face fit to the inside of an aperture. This is not a roller door for inbetween or external fitting.
Installation is also very simple, with minimal components to assemble on site.
Manufactured from 0.45 gauge steel, with a plastisol colour coating and a superb full range of finished colours, including basic galvanised finish where colour is not required.
The Gliderol Industrial roller door can suit a commercial opening of up to 5 metres wide and 4.9 metres high. It is an ideal roller shutter door where daily use is less than about 20 operations a day and insulation is not important.
The Gliderol Series B roller shutter door is ideal for light industrial/commercial use and larger domestic garages. It is not for any application where the door is likely to operate more than 30 times a day or it is very exposed to high winds.
> Spring assisted mechanism
> Weatherseal - Durable weatherseal helps prevent any undesirable material entering your garage.
> Bottom Rail - Constructed in Aluminium, designed to help prevent any intruder entering your garage. Provides security and strength.
> Chain Guide - Prevents the chain from slipping or releasing from the chain wheel.
Plastisol Colours
White
Black
Anthracite Grey
Vandyke Brown
Olive Green
Juniper Green
Burgundy
Navy Blue
Honesty
Goosewing Grey
Merlin Grey
Mahogany Woodgrain
Installation instructions provided with every door ordered.
The Ordering Width is the daylight opening between the guides PLUS 100mm and the Ordering Height is the height of the side guide rails NOT including the complete roller curtain which will vary from 460 - 530mm depending on the door height.
Side room required for installation of the door will vary from 150 - 225mm depending on the height of the door and the mechanism supplied for the chain operation.
• Light Industrial/Commercial use - 10 years corrosion free on door panel excludes paint surface rubbing or fading..
1 year on the lock and face plate, spring, bottom roller, weatherseal and polyglide, if fitted by an authorised Gliderol Distributor or Gliderol Technician.
• Industrial/Commercial use - 1 year on the lock and face plate, spring, bottom roller, weatherseal and polyglide, if fitted by an authorised Gliderol Distributor or Gliderol Technician.
The manufacturer strongly recommends that all Gliderol products be serviced by an authorised Gliderol Distributor or Gliderol Technician every 12 months to ensure longevity of the products’ life. Failure to do this may result in any warranty being invalid.
Warranties of 2 years electrical, 6 years mechanical and 10 years paint finish apply to all Gliderol doors (except Mini Roller Garage Doors).
PRODUCT WARRANTY CONDITIONS
Warranty Conditions
1. Subject to the under mentioned specific limitations and exceptions, the Manufacturer warrants all new doors, motors and electronic components of its
manufacture to be free from defect in workmanship under normal use and service and further warrants all installation carried out by the Manufacturer or by its nominated installers to be free from defects and workmanship its obligations hereunder being limited to making good any such defect PROVIDED THAT notice of any claimed defect in material workmanship in or resulting from installation of any door shall have been given to the Manufacturer within the period from date of installation as prescribed in the schedule hereto.
2. This warranty does not apply to any defect, loss or damage arising or caused directly or indirectly by or as a result of;
(i) Any masonry rendered or other surfaces cracking or collapsing during installation of the door.
(ii) Any defect or deterioration of timber including drying out after installation.
(iii) Any weakening or collapse of the structure to which the doors are affixed occurring any time after installation.
(iv) Any damage to or deterioration in the condition of the doors occurring in transit by customer nominated or appointed carrier or occurring after delivery and prior to installation.
(v) Any defect (including defects in component parts or accessories) rising from or attributable to the failure to carry out normal preventive maintenance or adjustment.
(vi) To any additional defect damage or deterioration arising from or attributable to the operation of the door after it is known to be defective.
(vii) Any door being installed within 800 metres of the sea or other body of water of equivalent or greater salt concentration or in an area subject to industrial fall out.
(viii) Any fault or surge in customer’s electricity supply.
(x) The door striking an immovable object during travel.
(xi) Garage doors should be inspected upon delivery and viewed in natural light (not direct sunlight) from a standard distance of 3 metres to view their overall appearance. From this distance the door panel should appear free from marks or distortion, stains, blemishes, indentations or scuffs. If any marks are only visible within 3 metres they will not be considered under warranty.
3. Items excluded from warranty;
(i) Batteries
(ii) Fuses
(iii) Globes
(iv) Sensitivity adjustments
(iiv) Minor factory repairs
4. While Gliderol doors are long lasting and hard wearing under normal conditions this warranty does not extend to inherent defects in steel or other material used in the manufacture. The Manufacturer will however, procure and assign to the customer the benefit of the warranty of the manufacturer of the steel or other material.
5. If Manufacturer has at request of customer procured painting, powder-coating or other surface application to its product this warranty does not extend to such painting, powder-coating or other surface application. For this purpose Manufacturer at all times acts as agent of customer. Manufacturer may as a
service to the customer but without any legal obligation to do so, assist customer to obtain redress in respect of any defect.
6. The Manufacturer reserves the right to touch up on site the paint finish and or pre-painted surfaces on its range of garage doors but no responsibility will be taken for the possibility of any paint rubs, scuffing etc on the internal wash coat finish or external painted surface.
7. Proof of purchase MUST be provided to the manufacturer at time of warranty claim. If proof is not available any warranty may be invalid.
The Ordering Width dimensions for this roller door is the daylight opening width, between the guides, PLUS 100mm.
So, if your structural opening is 4000mm wide then the ordering width would be 4100mm.
Measure your structural opening width in several places and using the widest dimension add on 100mm for the Ordering Width and this allows sufficient guide fixing either side.
You will require more than 50mm either side to incorprate the guide fixing lugs and more for the mechanism/motor section at higher level on one side.
You choose the side for the electric motor drive looking from inside outwards.
The Ordering Height is the height of the side guide rails, NOT including the roller curtain, which will vary from 460 - 530mm depending on the door height.
Side room required for installation will vary from 150 - 225mm depending on the height of the door and the mechanism supplied for the chain operation.
