Gliderol gliderol mini roller a series garage door steel roller garage doors

Close Menu
Mini Roll Continuous Steel Curtain Single Skin - up to 3400mm Wide
Roller Garage Doors
3 Woodgrain Laminate Colours
Material: Steel 
Enquiry Form
Call Us
Email Us
Web Price: £524.00
(Excluding VAT and £628.80 Inc. VAT)
1
Ordering
Width
Height
Web Price: £524.00
(Excluding VAT and £628.80 Inc. VAT)
Secure Payment
NEED HELP? Call us on 01933 448 850
or click here to connect via our Live Chat
  • Description
  • Application
  • Specification
  • Installation
  • Warranty
  • Measure
Description

The Gliderol Mini Rol-a-door is a compact version of the Gliderol Series A steel roller door and is a roller door which only requires 340mm of headroom.

Made to measure as standard this door also comes prefinished to the external face in a choice of woodgrain effect finishes.
The Mini Rol-a-door requires less space above the door opening, making it ideal for flat roof garages or other garages that may have restricted space.

The roller door is spring assisted which makes it light and easy to open with a smooth and quiet operation but also availabl eas an electric operated version

Application

domestic garage doors or light commerical use

Specification

> Twin solid locking bars for a secure closure.
> Highly durable, wipe clean finish

This roller door can only be face fitted to an internal aperture and is not suitable for fitting inbetwen an opening

Colour Options
Golden Oak
Rosewood
Mahogany Woodgrain

Smooth mid grey inner face.

> Every door includes a handle and lock barrel. If your door is remote control operated the door will not require the lock as the motor holds the door in a locked state.

Installation

To view the Gliderol G+ Operator Installation Instructions, click here PDF >

Warranty

• Domestic/Residential use - 10 years corrosion free on door panel excludes paint surface rubbing or fading. (Mini Roller door has 1 year total warranty cover).
1 year on the lock and face plate, spring, bottom roller, weatherseal and polyglide, if fitted by an authorised Gliderol Distributor or Gliderol Technician.
3 month warranty on spring tension.
• Industrial/Commercial use - 1 year on the lock and face plate, spring, bottom roller, weatherseal and polyglide, if fitted by an authorised Gliderol Distributor or Gliderol Technician. 3 month warranty on spring tension.
The manufacturer strongly recommends that all Gliderol products be serviced by an authorised Gliderol Distributor or Gliderol Technician every 12 months to ensure longevity of the products’ life. Failure to do this may result in any warranty being invalid.
Warranties of 2 years electrical, 5 years tubular motors, 6 years mechanical and 10 years paint finish apply to all Gliderol doors (except Mini Roller
Doors see above).
Garage doors should be inspected upon installation and viewed in natural daylight (not direct sunlight) from a standard distance of 3 metres to view their overall appearance. From this distance the door panel should appear free from visible marks or distortion, stains, blemishes, indentations or scuffs.
Only marks visible from a distance of more than 3 metres will be considered under warranty.

PRODUCT WARRANTY CONDITIONS
Warranty Conditions
1. Subject to the under mentioned specific limitations and exceptions, the Manufacturer warrants all new doors, motors and electronic components of its
manufacture to be free from defect in workmanship under normal use and service and further warrants all installation carried out by the Manufacturer or by its nominated installers to be free from defects and workmanship its obligations hereunder being limited to making good any such defect PROVIDED THAT notice of any claimed defect in material workmanship in or resulting from installation of any door shall have been given to the Manufacturer within the period from date of installation as prescribed in the schedule hereto.
2. This warranty does not apply to any defect, loss or damage arising or caused directly or indirectly by or as a result of;
(i) Any masonry rendered or other surfaces cracking or collapsing during installation of the door.
(ii) Any defect or deterioration of timber including drying out after installation.
(iii) Any weakening or collapse of the structure to which the doors are affixed occurring any time after installation.
(iv) Any damage to or deterioration in the condition of the doors occurring in transit by customer nominated or appointed carrier or occurring after delivery and prior to installation.
(v) Any defect (including defects in component parts or accessories) rising from or attributable to the failure to carry out normal preventive maintenance or adjustment.
(vi) To any additional defect damage or deterioration arising from or attributable to the operation of the door after it is known to be defective.
(vii) Any door being installed within 800 metres of the sea or other body of water of equivalent or greater salt concentration or in an area subject to industrial fall out.
(viii) Any fault or surge in customer’s electricity supply.
(x) The door striking an immovable object during travel.
(xi) Garage doors should be inspected upon delivery and viewed in natural light (not direct sunlight) from a standard distance of 3 metres to view their overall appearance. From this distance the door panel should appear free from marks or distortion, stains, blemishes, indentations or scuffs. If any marks are only visible within 3 metres they will not be considered under warranty.
3. Items excluded from warranty;
(i) Batteries
(ii) Fuses
(iii) Globes
(iv) Sensitivity adjustments
(iiv) Minor factory repairs
4. While Gliderol doors are long lasting and hard wearing under normal conditions this warranty does not extend to inherent defects in steel or other material used in the manufacture. The Manufacturer will however, procure and assign to the customer the benefit of the warranty of the manufacturer of the steel or other material.
5. If Manufacturer has at request of customer procured painting, powder-coating or other surface application to its product this warranty does not extend to such painting, powder-coating or other surface application. For this purpose Manufacturer at all times acts as agent of customer. Manufacturer may as a service to the customer but without any legal obligation to do so, assist customer to obtain redress in respect of any defect.
6. The Manufacturer reserves the right to touch up on site the paint finish and or pre-painted surfaces on its range of garage doors but no responsibility will be taken for the possibility of any paint rubs, scuffing etc on the internal wash coat finish or external painted surface.
7. Proof of purchase MUST be provided to the manufacturer at time of warranty claim. If proof is not available any warranty may be invalid.

Measure

 dimensions for the gliderol roller door

Before you specify and order a Gliderol steel single skin roller garage door you need to understand the dimensions and ordering references used as they do differ from many other types of roller garage doors.

Below is a basic diagram showing the terminology used in the ordering and specifying process:


Ordering Width Dimensions Explained

The Ordering Width when specifying and ordering a Gliderol steel roller door is the Opening Width plus the roller door curtain overlap and is generally therefore the garage Structural Opening Width plus the door curtain overlap on each side which is 25mm each on a roller door up to 3400mm total width or 50mm each side on a door over 3400mm. The side room required for actually installing the roller door is different again as there are quite large supporting steel L brackets at high level which are fitted wider than the roller guides referred to in the ordering width and also fixing lugs on the steel side guides.

Example: A 2300mm wide garage door structural opening requires a further 50mm adding for the 2 no. 25mm guides each side giving an Ordering Width size of 2350mm.

Ordering Height Dimensions Explained

The Guide Height is also the reference for the Ordering Height for a Gliderol continuous curtain steel roller door -

It is the height of the steel side guides that the roller door curtain slides up and down in and if you are ever in doubt about your height (i.e. unfinished floor, etc) you can always order these higher than required and cut the guides on site if necessary from the bottom and the curtain roll will simply take up the slack in adjustments.

Example: A floor to RSJ/lintel height of 2200mm would mean ideally you need 430mm of headroom above this and the ordering measurement would be 2200mm. If you do not have 430mm of headroom the roller door will still fit but you will lose drive through height when open .

In the worst scenario of having no headroom at all then you will require some kind of front mounted fascia cover to cloak the roll from view outside but your order height will be the total height less the curtain roll size required.

The curtain roll size also depends upon the height of the door ordered, see the table below: