SeceuroGuard 1001 Collapsible Security Grilles
The SeceuroGuard 1001 Retractable Security Gate offers an outstanding mix of security with the elegance of the lattice style design.
The SeceuroGuard 1001 is an SWS Insurance Approved design. Approval has been gained as a result of independent testing to Loss Prevention Standard (LPS) 1175 Security Rating Classification 1 and removing the guesswork from selecting a product, knowing it to be secure from the start.
|
|
  |
How can you know which products are truly resistant to physical attack?
Appearances may suggest security, but can you be sure that a product does not contain a design flaw that will allow rapid access to the ingenious burglar? Specifiers, end-users, the police and insurers are increasingly demanding physical security products that carry an independent stamp of compliance and quality assurance.
The Loss Prevention Certification Board (LPCB) is the UK’s leading independent certification body for fire and security products operating an approval scheme to LPS 1175. Approval and certification is based on the testing of a product’s performance and the manufacturer’s quality management systems being in accordance with ISO 9002. Installation procedures are also defined to a specific, high standard, ensuring the product performance is not compromised by sub-standard installation. These specialist products should only ever be attached to structurally sound openings such as masonry, brick, steel or timber, moreover the type and frequency of fixings required is very precise. LPS 1175 is the only meaningful benchmark for gauging actual resistance in the face of a determined attack. Passing the test regime is a tough and lengthy process that has been successfully completed by the SeceuroGuard 1001. Under the stringent conditions of a comprehensive test regime, SeceuroGuard 1001 is subjected to a variety of assaults from equipment commonly used for vandalism and breaking and entering, in order to ascertain its burglary resistance to physical attack.
LPCB approval and certification gives assurance of the SeceuroGuard 1001 construction and consistent performance to an internationally recognised standard. Take the guesswork out of product selection - use tested and approved products from the SWS range.
As a further reinforcement of the products performance, the SeceuroGuard 1001 retractable security gate has successfully undergone Secured by Design evaluation and is able to display the “Police Preferred Specification” mark. Secured by Design identifies technical standards and evaluations which test the competence of security products and their resistance to criminal attack. The tests and evaluations are carried out by UKAS approved test houses.
FOR RETAIL PREMISES
The added security and strength of the insurance approved SeceuroGuard 1001 offers effective protection of high value stock in window and store displays. Combining many of the features of the SeceuroGuard 1000 with increased structural strength and, in most cases, 4 point locking, the SeceuroGuard 1001 has optional folding bottom tracks to allow unrestricted access through doorways when the gates are open and compact sashes which fold neatly to the side to give unobscured visibility of window displays.
FOR BUSINESS PREMISES
Businesses in vulnerable locations or premises containing valuable stock or equipment are often targeted by criminals. Either on an insurance company’s recommendation, or to potential future attack, the insurance approved SeceuroGuard 1001 is the perfect physical barrier. Offering enhanced strength and security with minimal obstruction to visibility and natural light even when the gates are in the closed position, premises and staff are protected with no detraction to the overall appearance of the office environment.
SECEUROGUARD 1001 - HIGH PERFORMANCE SECURITY, NO SACRIFICE IN APPEARANCE
The Seceuroguard retractable grilles are tested regularly and constant improvements to the design are always considered. Fixed correctly these grilles offer fantastic resistance to a forced and consistent attack.
 |
 |
- Strong
Made from high quality galvanised steel with a patented fixing system - Versatile
Custom built for almost any opening, gates fit internally in either the window reveal or around the opening in either single or double-sash configuration - Ease of use
Smooth top running operation with an option of a folding bottom track to leave doorways unobstructed - Secure
Multi-point locking (4 point in most cases, with three point on smaller gates) operating from a single key which is out of view of potential attackers whist remaining easy to operate from either side - High quality maintenance free finish
Supplied in high quality white powder coated finish as standard. Optional colours are available from stock and any RAL or BS colours on request - A floating sash version is available on larger openings.
- A fixed frame version is available when retraction of the gate is not required but they are to match other gates on the premises.
When extra security and strength is needed, SeceuroGuard 1001 is the insurance approved option. Stylish, yet deceptively strong, unobtrusive, essentially maintenance free and easy to use, the SeceuroGuard 1001 offers LPCB certified and approved protection.
Retractable Security Grille Terminology
RETRACTABLE SECURITY GRILLE ARRANGEMENT
1 - Top hung on nylon coated steel bearings
2 - All high quality galvanised steel construction
3 - Powder coating finish in a range of colours
4 - Fits within or behind the reveal
5 - Multi-point locking from single key - 2 point
6 - Strong steel lattice with smooth durable finish
7 - Overlapped locking profiles
8 - Optional folding bottom track available
9 - Steel riveted lattice assembly system.
Help on measuring for a Security Grille >
SPECIFICATION FOR A SECEUROGUARD 1001 SECURITY GATE
GENERAL ARRANGEMENT
1 - Top hung on nylon coated steel bearings
2 - All galvanised steel construction
3 - Powder coating in a range of colours
4 - Fits within or around the reveal
5 - 4 point locking from a single key with the lock mechanism shielded by a steel plate
6 - Strong steel lattice with smooth durable finish
7 - Overlapped locking profiles
8 - Optional folding bottom track
9 - The 1001 has a specially designed lattice assembly system utilising high grade steel screws (patented).
The validity of the LPCB certification is contingent upon each security gate being installed in accordance with the requirements of LPS 1175.
Reveal or face installation
> Min fixing distance from edge of reveal 50mm
> Max fixing distance from any corner 100mm
> Max distance between fixing 400mm
> All fixing heads spoiled: Masonry 2.5” x 12s - Wood 4.0” x 12s - Steel 1.0” x M8s
