DescriptionThe Teckentrup Thermoteck roller door is another fine example of top level German engineering. This roller shutter door is not a DIY installation and is a serious door for serious applications, particularly in larger sizes. Everything about the door can be customer designed if required but the basic door is a high quality, aluminium, double skinned slat with a three phase direct electric motor drive. A huge variety of control are available to suit any environment, inside or outside the building.
Aluminium roller shutter doors are particularly useful in harsher environments such as applications near the sea, or in agricultural settings. The 4020 aluminium slat profile is more corrosion resistant than galvanised steel.
This is a double skin, insulated, industrial roller shutter door constructed from aluminium profiled slats. The direct drive motor like other ThermoTeck doors, offers the very best and efficient electric motor operation with minimal moving parts and therefore less wear and tear over time.
LIke other industrial roller doors supplied by Samson, this door in standard form complies with all regulations regarding safety and compliance in the workplace:
Anti Drop safety devices on the motor drive.
Self monitoring safety edge detection system
Additional infra red safety beams for extra protection in public places.
Performance data statements - see specification tab
The ThermoTeck roller door represents a new standard in industrial doors and takes any user away from the limited expectations of the many budget priced and badly specified, frankly dangerous roller doors so often used over the last 20 years or so in the UK. Most roller doors of low quality simply give roller shutter doors a bad name generally and so many are slow, noisy, inefficient and dangerous under scrutiny.
Make the move to a far higher standard of door to offer many benefits previously undiscovered and taken for granted in the ThermoTeck roller door range.
High Quality
High Performance and Safety Standards
Efficiency for Energy Saving with insulated Curtain
Faster Opening Speeds and Quieter Operation
Tested Operating Cycles of Over 200,000 Operations
Low Maintenance through High Quality Components
Specification Aluminium, double skinned, insulated roller shutter door with three phase direct drive electric operation as standard.
Profiles made of aluminium, double-skinned
Thermal insulation
- U-value in acc. to EN ISO 12567-1 (door width = 4000 x 4000 mm)
- U-value W/(m²*K) complete door): 3,5 W/(m²*K)
Sound insulation
Air permeability
- Classification in acc. with EN 12426 class: 0
Resistance to wind loads
- Classification in acc. with EN 12424 class: 2
Resistance to water penetration
- Tested in acc EN 12489
- Classification in acc. with EN 12425 class: 0
Motor Drive:
Direct mount drive with integrated anti-drop device or chain drive with separate anti-drop device and electric forced disconnection, (three-phase volt.) 400V, 50Hz, 20 cycles per hour, degree of protection IP54, with emergency crank handle (TÜV tested and maintenance-free). Other special voltages, degrees of protection, or types of emergency operation available on request.
Access Controls
For direct mount and chain drives, fully wired ready for use and with CEE plug. Basic version can be locked and used as a deadman control, can be easily retrofitted with:
Self-locking “CLOSE“ in con. with safety edge device
Radio control
- Accessories for control units:
- Auto. closing (with traffic lights)
- Traffic light control
- Digital induction loop
- Without safety edge mechanism:
- Basic version 24V control voltage (safety low volt.) degree of protection IP65, “close door“ in deadman mode (permanent pressure), push buttons “open-stop-close“.
- With safety edge mechanism:
- With self-monitoring, electro-mechanical safety edge mechanism, safety-low voltage 24V, IP 65, “close door“ and “open door“ in self-locking mode with push buttons “open-stop-close“
Dimensions
Ordering dimensions
Width: 1.000 - 11.500 mm
Height: 1.000 - 12.000 mm up to 18.000 mm width available on request!
Resistance to wind load (EN 12424)
Up to width
class 2 in standard 11500 mm
class 3 in standard 5000 mm
class 3 available (additional charge) 8500 mm
class 1 available > 18000 mm on request
class 2 available > 15000 mm on request
class 4 available on request
Door curtain Door curtain, consisting of hinge-like interconnected galvanized steel.
Profiles
Double-skinned aluminium, 100 mm wide
Surface Finish
Aluminium stucco design
Plain aluminium
Coil-coated aluminium with protective film on the inside
Glazing option
Synthetic glazing, crystal clear approx. 150 mm x 55 mm
Bottom seal
Double-skinned box profile made of aluminium with permanently elastic and frost-proof EPDM
profile hose seal for a sealed bottom door edge.
End Caps
Robust, wear and corrosion-free plastic parts for fixing the profiles.
Wind Hooks
For high wind loads and/or large widths the doors are equipped with wind hooks and a reinforced bottom seal.
Guide Rails
Robust steel profiles with wear-proof, easy to change plastic guides.
Winding Shaft
Prime coated steel tube with welded-in shafts on both sides for drive, anti-drop or bearing seat.
Header Seal
As standard, except for doors with ventilation grilles, louvres or other types of ventilation.
