Carteck carteck switch 40mm insulated centre ribbed vertical 3 standard colours steel side hinged garage doors

• 6 standard sizes
• 3 colours and 3 designs
• 3 surface mounted hinges per leaf
• Aluminium strip threshold
• Friction door stays to each leaf
• U value of 2.30 W/m²K

Domestic or Commercial use.

Excellent strength and locking offers great security and insulation for any garage, store room, warehouse or other building.

Certified U value of 2.3 W/m2K

BS EN 13241-1 - These doors are independently tested and verified to all current safety legislation and carry a CE/ UKCA Mark. 

High Quality Hinges - Aluminium surface mounted hinges are easily adjusted. Three hinges are fitted to each leaf.

Friction Door Stays - Each leaf is fitted with an easy-action friction stay to hold the door leaf open.  This is not designed for high wind applications.

Aluminium Strip Threshold - The aluminium profile provides a simple low profile threshold (without a weather strip).

Solid 40mm Thick Panels - Doors are built with 40mm thick interlocking insulated panels and an aluminium hollow section frame that provides excellent strength, rigidity and resistance to corrosion.

Double weather strips and mitred corners.  In addition to the circumferential weather strip around the door leaf, the door frame has a three-sided weather strip for excellent draught reduction. Profiles are mitre jointed for a neat finish. 

Flush bolt Security - The inactive leaf is secured with flush bolts to the top and bottom of the leaf. Each bolt has an adjustable flush bolt plate for greater versatility on the position of the leading edge on the inactive leaf as seals compress over time.

Stainless steel handles and security locking.  High grade stainless steel handles and lock covers are tough and attractive, whilst the latch and dead bolt combination provides dependable security. A convenient thumb turn operates the lock from the inside. The inactive leaf incorporates a stainless steel strike plate with an adjustable latch plate for precise latching and a steel lock keep box for added attack resistance. 

 

Security lock cylinder. Certified to BS EN1303 Cylinder Security Grade 2, our lock cylinder provides enhanced security and is anti-drill and anti-pick. The cylinder also features a break off system which is designed to prevent the cylinder from being broken by including a 'sacrificial' section that breaks off if an attempt to break the cylinder is made, whilst leaving sufficient cylinder is made, whilst leaving sufficient cylinder is made, whilst leaving sufficient cylinder remaining to still operate the lock with a key. 

Every door comes with 3 keys as standard.  Additional keys can be cut at a high street locksmiths. 

Installation details provided with the door.

The door is delivered with the frame, hinges and all major components factory fitted, ready for easy on-site installation.

5 Point Guarantee

The warranty periods below only apply to products that have been correctly installed as per the instructions, maintained by a Garage Door Specialist and operated and cleaned in accordance with the requirements set out in the operating and maintenance sections of instructions and labels.

2-year manufacturer’s guarantee

On window units, hinges, locks, handles and stays (opening/closing max. 5 times a day

10-year manufacturer’s guarantee

On panels against rust penetration from inside to outside
Against door panel separation of steel from foam
On material and manufacturing flaws of all non-moving parts of the frame that are verifiably unusable or whose usability is substantially compromised
On floor seal, intermediate seals and frame seals against rotting.

The guarantee does not apply to doors which are subjected to extreme conditions, e.g. corrosive influences resulting from use in a coastal climate with high salt content.