- Description
- Application
- Specification
- Installation
- Warranty
- Measure
The Seceurobar removable window bar system uses tough powdercoated round steel bars which are locked in place on the inside of windows, in either vertical or horizontal format. Strong extruded aluminium retaining units secure each bar, yet the unique locking system means that they can be released in seconds for access to clean or simply have the window without the bars. You can remove one, several or all the bars as required and what is left is secured by the key lock again.
Each bar rotates in its individual position so any attempts to cut the bars uisng a hack saw or similar will not be successful.
The main fixings are into the top and bottom steel retaining sections and for measuring simply take the smallest height and deduct a small tolerance of 5-10mm which then gives you the ordering height. The width is pretty much the same, taking the smallest width measured and taking a small tolerance off for fitting and then you have the ordering width.
Each bar is prefinished in RAL 9016 white in a tough and special paint finish with a satin finish. Other colours are available on request.
Ideal for low/medium security domestic or commercial applications where removal of the security device is required occasionally.
The removable window bars are operated by a single radial lock point. The key must always be pressed in before any key rotation is possible.
To view the specification sheet on the SeceuroBar window bars click here PDF >
The SeceuroShield bars are powdercoated in Semi-gloss White RAL 9016 as standard with a choice of powdercoated colour options at extra cost.
See link here to view colour options >
Fitting Positions
If the reveal construction is solid steel or a cavity then it would be better to face fix the system around the opening.
You must check that the reveal is straight and level, any deflection of the bottom retaining unit will cause the mechanism to stick. Packing strips can be used to make the reveal level.
If the reveal slopes inwards or outwards, or the top retaining unit is not fitted directly above the bottom retaining unit, the sockets will not lock in the slider mechanism. The reveal should be levelled up with packing strips and re-measured.
When measuring for window bars which are fitted horizontally you must provide the width and height as shown in the diagram. The maximum width for a window bar fitted horizontally is 2000mm. When mounting the bars horizontally the lock must always be on the left looking from the inside out.
Face Fix and Horizontal Operation
The system can be supplied (at additional cost) with pre powdercoated 50mm x 50mm aluminium packers to face fix it to any wall. When mounting the bars horizontally the lock must always be fixed on the left hand side looking from inside out.
To view further information on the SeceuroBar Removable Window Bars, please click here >
View our page on Security Window Bars.
Installing A SeceuroBar
When bars are fitted horizontally:
All SeceuroShield products are guaranteed against defect of material or workmanship by SWS UK, subject to correct installation, maintenance and operation, for a period of 2 years from the date of purchase.
MEASURING
When measuring, it is important that the dimension of the width (shown in the picture) is given first, before the dimension of the height to avoid any confusion. You must ensure that tight reveal sizes (in particular the height) are given when ordering. Failure to do this could result in the bars being cut too short and the level of security being offered is compromised.
